This is about 42 long overall and will accept 40 wide/long sheet metal. Mount to a bench or two horses with C-clamps plug in the 18 handles insert and clamp down the sheet and bend aluminum for your windows or soffits. Goes for about $250 new. I did all of my windows and some other trim. Note: If you need to cover trim that is longer than 40 you will have to use two pcs and properly overlap them but if you take your time and do it right who is going to notice?
- Location: wantagh
- It s NOT ok to contact this poster with services or other commercial interests
|
|
|
|
You can make this ad more visible by locating the following code in your site,blog or forum
|
